Merik suite Merik Merik Studio Viewer QSheets

How the family mixer works

A MIDI file has up to 16 channels, each playing its own instrument, and every file lays them out differently. Instead of making you chase 16 channel faders, Merik Studio groups the channels by the kind of instrument into eight families. Each family has one fader and one on/off switch, at the top of the main window.

Channels join a family automatically. Merik Studio looks at the instrument (the General MIDI program) that each channel plays and puts the channel in the matching family. If a song changes instrument halfway, the channel moves with it. The table at the bottom of the main window shows, per channel, the instrument and the family it belongs to.

Family What goes in
1 Drums MIDI channel 10, the percussion channel
2 Bass Basses (GM programs 33–40)
3 Guitars Guitars (25–32)
4 Keys Pianos, chromatic percussion and organs (1–24), synth leads and pads (81–96), ethnic and percussive instruments (105–120)
5 Strings Strings and string ensembles (41–56)
6 Winds Brass, reeds and pipes (57–80)
7 Others Synth effects (97–104) and sound effects (121–128), and the place for extra audio stems such as a live vocal
8 Click The click track: its fader is the click volume and its switch turns the click on or off. No MIDI channels are placed here.

What the controls do - The fader (0–127) scales the volume of every channel in the family, live. The volume written in the file is the starting point, so a fader at 64 plays the family at about half of what the file says. This works for the built-in sound and for external MIDI devices alike. - The name button above the fader (or the R button on a controller) switches the whole family on or off. A switched-off family keeps playing silently, so it comes back instantly and in time. - In the channel table, the Active column fine-tunes a single channel: a click cycles green (on), orange (off for this song only, back on for the next song) and red (off until you change it). - Normalize can level the channels against the drum channel, so files that were mixed differently start from a similar balance.

Typical uses - Playing with a live drummer? Switch the Drums family off. - A singer wants space? Pull the Winds or Keys fader down, or switch that family off for the song. - A guitarist wants to play the solo? Mute just the guitar channel for this song with the orange state.

The same eight faders and switches (the last one is the click) are available on a MIDI controller such as the nanoKONTROL2 and, with the remote key, on the web page.